5 Inch Lift Kit - Ford/Mazda B3000 (98-08)/Ranger (98-11) 4WD

$1,099.95

Free Shipping on all orders in the contiguous United States!

SKU: PDSUS43130 Barcode: 843030149420

Explore New Heights Take your SUV / Truck to new heights and give your suv a more aggressive look with Rough Country's 2-inch Lift Kit specifically for air-ride-equipped models! The Tahoe comes with a factory rake, leaving the rear much higher than the front. This simple solution raises the front to match the height of the rear, providing a more aggressive appearance and enough increased ride height to run larger tires and wheels. Durable Components Don't limit your new truck! This set of lower front strut mount extensions immediately offers increased ground clearance without the hassle of a long and drawn-out installation process. Featuring 100% bolt-on installation and a unique design that allows fitment without the need to disassemble the strut, you're ready to get that killer look in no-time flat. Each kit includes all necessary hardware for installation and relocation brackets for the ride height sensors to ensure that installation goes smoothly. Limited Lifetime Replacement Warranty. Rough Country's 2"

Available Now!
Supplier: Performance Discounters

  • Brand: Rough Country
  • Manufacture part number: 43130
  • Model: Suspension Lift Kit
Year
Make
Model
Submodel
Notes
2001 - 2005
Ford
Ranger
Edge
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2006
Ford
Ranger
FX4
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2005, 2007
Ford
Ranger
FX4
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1998
Ford
Ranger
Splash
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2006 - 2011
Ford
Ranger
Sport
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive s haft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2004
Ford
Ranger
Tremor
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2005 - 2006
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A to rsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2007
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion b ar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2002
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum oper ated hubs. (see instructions)
1998 - 2001, 2003 - 2004, 2008 - 2011
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1998 - 2008, 2010 - 2011
Ford
Ranger
XLT
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2002, 2005
Mazda
B3000
Base
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1999 - 2001
Mazda
B3000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1998
Mazda
B3000
SX
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2005 - 2009
Mazda
B4000
Base
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2007 - 2008
Mazda
B4000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed thro ugh the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2006
Mazda
B4000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive sha ft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2003 - 2005
Mazda
B4000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2000
Mazda
B4000
Troy Lee
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)