Rough Country 5" Lift Kit For Ford Mazda B3000 98-08 Ranger 98-11 4WD

$1,099.95

Free Shipping on all orders in the contiguous United States!

SKU: PDSUS43130 Barcode: 843030149420

Take your vehicle to the next level with Rough Country Accessories, the ultimate blend of functionality, durability, and style. From rugged off-road essentials to premium upgrades, Rough Country Accessories are designed to enhance your vehicle's performance and appearance, allowing you to conquer any trail or terrain. Whether you need heavy-duty recovery gear, protective components, or stylish enhancements, these accessories are built to withstand the harshest conditions while delivering the reliability and toughness you expect. Gear up with Rough Country Accessories and be ready for any adventure—because your journey deserves the best.

Only 2 left!
Supplier: Performance Discounters

  • Brand: Rough Country
  • Manufacture part number: 43130
  • Model: Suspension Lift Kit
Year
Make
Model
Submodel
Notes
2001 - 2005
Ford
Ranger
Edge
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2006
Ford
Ranger
FX4
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2005, 2007
Ford
Ranger
FX4
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1998
Ford
Ranger
Splash
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2006 - 2011
Ford
Ranger
Sport
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive s haft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2004
Ford
Ranger
Tremor
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2005 - 2006
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A to rsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2007
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion b ar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2002
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum oper ated hubs. (see instructions)
1998 - 2001, 2003 - 2004, 2008 - 2011
Ford
Ranger
XL
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1998 - 2008, 2010 - 2011
Ford
Ranger
XLT
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2002, 2005
Mazda
B3000
Base
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1999 - 2001
Mazda
B3000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
1998
Mazda
B3000
SX
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2005 - 2009
Mazda
B4000
Base
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2007 - 2008
Mazda
B4000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed thro ugh the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2006
Mazda
B4000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive sha ft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2003 - 2005
Mazda
B4000
SE
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
2000
Mazda
B4000
Troy Lee
17in or larger wheels are REQUIRED. Does NOT fit 11.25" rotors found on some 98-03 models. Does NOT fit models with 31 spline rear axle. Models with 11.25" rotors must upgrade to 12.1" rotors. Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs. An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1. A torsion bar tool is required for installation, such as SKU: 1067. Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)